• 2023-09-25
• 686
• 5 Comments

What are the maintenance precautions of standard mold parts?

The maintenance of mold standard parts must be carried out by professional maintenance workers in this area, and maintenance personnel must have a very deep understanding of the technical standards of mold standard parts, because the mold is different from the general parts, its size and the shape of any part can not be interesting deviation. And the mold standard manufacturers should pay attention to the following aspects, so as to grasp the relevant details and not destroy the internal structure in the process of maintenance.

First, pay attention to the mold inspection, troubleshoot the problem

In the process of use, if there is a problem with the standard parts of the mold and the whole set of molds, the last final product should be selected during the process of repair and the problem should be carefully checked. Through the mold standard parts manufacturers emphasize that it is often mainly to check whether there are strains or mucous membranes and broken details, etc., to determine the problem and then find out the appropriate method for repair or replacement.

Second, pay attention to the part of the situation welding repair

If it is checked out and found that there are cracks or falling blocks and slight collapse and other similar problems, then it can be repaired by welding and should be carried out in a timely manner so that the mold can be used for a longer time. If this happens to small molds, it may have a more serious impact, so in this case, it should be replaced in time.

3. Pay attention to other details

In the process of maintenance of mold standard parts, it should be necessary to thoroughly clean the sliding parts of the machine using mold standard parts, such as the core-pulling mechanism and guiding device introduced by the manufacturer, and do the relevant lubrication work. Mold standard parts if there is a hydraulic shaft, then it should be repaired at the same time as the abrasive standard room, and special attention should be paid to cleaning and preventing pollution and other problems.

The above is a few precautions for the maintenance of mold standard parts, in addition to regular maintenance after repair. At the same time, non-standard mold manufacturers to complete the maintenance of the mold, should be immediately the forming surface, parting surface and installation surface to do anti-rust treatment, close, set the mold, according to the mold on the machine installation direction and then placed on the plate, and to ensure that the mold accessories and mold together, standardized operation can ensure foolproof.