• 2023-09-25
• 725
• 5 Comments

Solutions to prevent mold parts from rusting

No matter which level of processing plant in the production process, it is possible to face the problem of mold parts rust, in order to avoid rust in the process of production and transportation, high-quality mold parts factory will issue a certain program according to its own processing technology to prevent the occurrence of rust parts, where to buy mold parts rust solutions?

Solutions to prevent mold parts from rusting

1, decomposition of the resulting gas

Some mold parts in the process of processing will produce a certain volatile gas, and these gases are mostly corrosive, these corrosive gases will have a certain impact on the parts, corrosion or rust, so after the completion of the processing to stop the mold parts production equipment in time, decompose the generated gas or timely discharge these gases. Then apply anti-rust agent;

2, dry the cooling water

Professional mold parts processing enterprises will have special workers to wipe off the cooling water, parts production process due to high temperature, must prepare a certain amount of cooling water to cool the parts instantaneously, but cooling will produce water vapor, these water vapor for a long time to infiltrate the parts will cause oxidation rust, so timely dry cooling water or excess water wipe off is also a way;

3. Remove carbides

During the production of mold parts, due to the long-term use of equipment, the produced parts will be more or less mixed with some carbides produced in the production, these carbides react in the air and adhere to the mold will cause corrosion of the mold, so if the mold parts processing plant finds that there are carbides on the production of parts, These carbides should be removed in time and the equipment should be cleaned;

The above is to solve the mold parts processing process to prevent rust proposed several solutions, parts processing not only in the production to prevent rust, but also in the process of transportation and sales to prevent rust or corrosion, so the processed mold parts will be wrapped in plastic film, isolated from the air to prevent damage and corrosion.